araknis wap login
Accessing the “araknis wap login” Is very easy given the below portal also with additional information links that you will get here as well.
-
• I Am Remote – Use if on a different LAN to access the WAP from over the Internet. Figure 2. WebConnect Access 4. Once you click the button, a new browser tab/window will load the login page for the WAP. You may now log in as normal. • Default Login Credentials – Username: araknis; Password: araknis
-
This manual was created to provide a reference for installers and end users of Araknis Networks™ products. It provides all known information regarding the installation, setup, use, and maintenance of
-
Locate new features with ease, and access a multitude of settings depending on the device—rename network and switch ports, assign VLANs, configure link aggregation to adjoining switches, control user access levels with detailed security options, and much more.
-
Page 13 Araknis Networks Wireless Access Point Quick Start Guide Step 5: Log Into Web Interface Log in using the default credentials: Username araknis Password araknis NOTE: If you can’t connect to the WAP using this method, or need to configure the device before connecting it to the network, try these options for accessing your device: •…
-
The WAP is configured to DHCP by default so that the DHCP server can assign an IP address when the AP is connected to the network (the DHCP server is usually the router). This address can be used for accessing the web interface. Use one of these methods to find the IP address of the AP: Check the device list in OvrC.
-
Page 16 Araknis Networks Outdoor Wireless Access Point Quick Start Guide Step 9: Log Into Web Interface Find the WAP in the OvrC device list, then click Web Connect. Select whether you are on the LAN (I Am Local) or connecting over the Internet (I Am Remote).
-
Page 12 Araknis Networks Wireless Access Point Quick Start Guide Step 5: Log in to Web Interface Log in using the default credentials: Username araknis Password araknis NOTE: If you can’t connect to the WAP using this method, or need to configure the device before connecting it to the network, try these options for accessing your device: •…
-
NOTE: If you can’t connect to the WAP using this method, or need to configure the device before connecting it to the network, try these options for accessing your device: • DHCP IP address – Page 15 • Default IP Address – Page 16 • OvrC – Page 19 Log in using the default credentials: Username araknis Password araknis A
-
2. Apply the settings. After configuration, the WAP web interface may be accessed using the system name. 3. Open a web browser and enter the configuration address for your WAP in this format (Example System Name = smith100): • Enter into address bar: http://config.smith100.wap/ 4. Enter the login credentials. (Default: araknis/araknis) Figure 12.
Conclusion:
Don’t forget to check your login information correctly for “araknis wap login” and Make sure to check CAPS Lock too to avoid the araknis wap login If you like to know more do let us know.